Dealing with an error code on your washing machine can be frustrating, especially when you’re in the middle of doing laundry. One common error that Whirlpool washing machine owners may encounter is the PE error. When the control panel displays the PE error code, it indicates an issue with the pressure sensor or water level sensor. This article will serve as a comprehensive troubleshooting guide to help you remove the PE error on your Whirlpool washing machine and get it back to its normal working condition.
Understanding the PE Error on Whirlpool Washing Machines
The PE error on a Whirlpool washing machine points to a problem with the pressure sensor or water level sensor. The pressure sensor is responsible for detecting the water level inside the washing machine’s drum during the wash cycle. It communicates with the control board to ensure the right amount of water is filled for each specific load. If the pressure sensor malfunctions or encounters an issue, the control panel will display the PE error code, indicating that the water level is not being detected correctly.
Troubleshooting and Removing PE Error on Whirlpool Washing Machines
Check the Water Inlet Valve and Water Supply
Begin the troubleshooting process by checking the water inlet valve and the water supply to the washing machine. Ensure that the water supply is adequate and that the water inlet valve is functioning correctly. A faulty water inlet valve can disrupt the water flow and trigger the PE error. Clean or replace the water inlet valve if necessary.
Inspect the Pressure Sensor
Locate the pressure sensor in your washing machine. It is usually located near the top or back of the machine. Inspect the sensor for any visible signs of damage or debris that may be blocking its proper functioning. Clean the sensor gently using a soft cloth or brush to remove any dirt or obstructions.
Test the Pressure Sensor
You can use a multimeter to test the pressure sensor for continuity and determine if it is functioning correctly. Follow the manufacturer’s instructions on how to access the pressure sensor and perform the continuity test. If the pressure sensor shows no continuity or appears faulty, consider replacing it with a new one.
Check the Air Tube
The pressure sensor is connected to an air tube that runs from the sensor to the bottom of the washing machine’s drum. Ensure that the air tube is securely connected and free from any kinks or blockages. A damaged or clogged air tube can cause inaccurate water level readings, leading to the PE error.
Perform a Master Reset
Sometimes, a simple master reset can clear the error code and resolve the issue. Turn off the washing machine and unplug it from the power source. Leave it unplugged for a few minutes, then plug it back in and turn it on. Check if the PE error has disappeared.
Check for Other Issues
If the PE error persists despite attempting the solutions above, it’s essential to check for any other underlying issues. Inspect the wiring and connections around the pressure sensor and control board. If you are unsure about troubleshooting on your own, it’s best to seek professional help.
Conclusion
The PE error on a Whirlpool washing machine is related to the pressure sensor or water level sensor. By following the troubleshooting solutions provided in this guide, you can remove the PE error and have your washing machine back to functioning correctly. Check the water inlet valve and water supply, inspect and test the pressure sensor, and ensure the air tube is free from obstructions. Consider performing a master reset to clear the error. If the PE error persists, check for other underlying issues or seek professional assistance.
FAQs
Can I continue using my Whirlpool washing machine with the PE error? It is not recommended to use the washing machine with the PE error, as it may lead to inaccurate water level readings. Resolve the error before using the machine again.
What causes the PE error in a Whirlpool washing machine? The PE error occurs when there is an issue with the pressure sensor or water level sensor. This could be due to a malfunctioning sensor or problems with the water inlet valve.
How do I clean the pressure sensor in my Whirlpool washing machine? Gently clean the pressure sensor using a soft cloth or brush to remove any dirt or debris that may be affecting its proper functioning.
What does the pressure sensor do in a washing machine? The pressure sensor detects the water level in the washing machine’s drum and communicates with the control board to adjust the water fill accordingly.
How can I test the pressure sensor in my Whirlpool washing machine? Use a multimeter to test the pressure sensor for continuity. Follow the manufacturer’s instructions to access the sensor and perform the continuity test.
What should I do if the PE error persists after troubleshooting? If the PE error persists despite attempting the solutions, or if troubleshooting becomes challenging, seek professional help.
Can issues with the water inlet valve cause the PE error? Yes, a faulty water inlet valve can disrupt the water flow, leading to inaccurate water level readings and triggering the PE error. Ensure the water inlet valve is functioning correctly.
Is performing a master reset an effective way to remove the PE error? Performing a master reset can sometimes clear the error code. Turn off the washing machine, unplug it for a few minutes, and then plug it back in to reset the system.
